How to Download and Install 3skeng Plugin for Sketchup on Windows
How to Download and Install 3skeng Plugin for Sketchup on Windows
3skeng is a 3D engineering software for Trimble Sketchup that allows you to design and document MEP and 3D piping and steel structures. If you are an engineer, planner, architect or installer working in any of the industries that require piping, steelwork, electrical tray, ventilation or exhaust systems, you may want to try 3skeng plugin for Sketchup.
3skeng Plugin For Sketchup Download For Windows
In this article, we will show you how to download and install 3skeng plugin for Sketchup on Windows PC. Here are the steps:
Go to http://3skeng.com/en/download.htm and choose the version of 3skeng plugin that matches your Sketchup version. For example, if you have Sketchup 2022, you should download 3skeng 2022.
Click on the download link and save the file to your computer. The file will be a ruby file with .rbz extension.
Open Sketchup and go to Window > Extension Manager. Click on Install Extension and browse to the location where you saved the .rbz file. Select it and click OK.
Sketchup will ask you to confirm that you trust the extension. Click Yes to proceed.
After the installation is complete, you will see a message that says "3skeng tools successfully installed". Click OK.
You will also see a new toolbar with 3skeng icons on your Sketchup window. You can use these tools to create and edit pipes, steelwork, channels, mounts and more.
Congratulations! You have successfully downloaded and installed 3skeng plugin for Sketchup on Windows PC. You can now start using it for your 3D engineering projects.
If you need more help or information about 3skeng plugin for Sketchup, you can check out the following resources:
The FAQ page of 3skeng website.
The Support page of 3skeng website.
The YouTube channel of 3skeng with tutorials and demos.
The Facebook page of 3skeng with news and updates.
We hope you found this article useful and informative. If you have any questions or feedback, please leave a comment below.
In this section, we will show you some examples of how to use 3skeng plugin for Sketchup to create and edit 3D engineering models.
How to Use 3skeng Pipe Tool
The 3skeng Pipe tool allows you to create and edit pipes and fittings with ease. You can choose from various pipe libraries and customize the parameters such as diameter, length, bend radius, insulation and more. You can also use the 3skeng List tool to generate reports and bills of materials for your pipe models.
Here are the steps to use the 3skeng Pipe tool:
Click on the 3skeng Pipe icon on the toolbar. A dialog box will appear where you can select the pipe library and the pipe element you want to use.
Click on the Sketchup workspace to place the first point of the pipe. You can use the inference system and the guidelines to align the pipe with other geometry.
Move the cursor to define the direction and length of the pipe. You can type in a value or use the mouse wheel to adjust the length. Press Enter to confirm.
Repeat steps 2 and 3 to create more pipe segments. You can also use the Tab key to switch between different pipe elements such as bends, tees, reducers and more.
To edit an existing pipe segment, double-click on it. A dialog box will appear where you can modify the parameters such as diameter, length, bend radius, insulation and more. Click OK to apply the changes.
To delete a pipe segment, select it and press Delete.
You can also use the 3skeng Connect tool to connect two pipe segments automatically. Just select two pipe ends that are close to each other and click on the 3skeng Connect icon. The tool will create a suitable fitting between them.
How to Use 3skeng Steelwork Tool
The 3skeng Steelwork tool allows you to create and edit steel structures such as beams, columns, braces, plates and more. You can choose from various steel profiles and customize the parameters such as size, length, angle, offset and more. You can also use the 3skeng List tool to generate reports and bills of materials for your steel models.
Here are the steps to use the 3skeng Steelwork tool:
Click on the 3skeng Steelwork icon on the toolbar. A dialog box will appear where you can select the steel profile and the steel element you want to use.
Click on the Sketchup workspace to place the first point of the steel element. You can use the inference system and the guidelines to align the steel element with other geometry.
Move the cursor to define the direction and length of the steel element. You can type in a value or use the mouse wheel to adjust the length. Press Enter to confirm.
Repeat steps 2 and 3 to create more steel elements. You can also use the Tab key to switch between different steel elements such as beams, columns, braces, plates and more.
To edit an existing steel element, double-click on it. A dialog box will appear where you can modify the parameters such as size, length, angle, offset and more. Click OK to apply the changes.
To delete a steel element, select it and press Delete.
You can also use the 3skeng Connect tool to connect two steel elements automatically. Just select two steel ends that are close to each other and click on the 3skeng Connect icon. The tool will create a suitable joint between them. 0efd9a6b88
https://www.mariamundi.com.br/group/mysite-231-group/discussion/99097438-3819-44b3-8fae-da2263d2af4b